TNU5U501
TNU5U501 TNU5U501 1-port 100G/200G programmable Hybrid Line Service Processing Board (CFP, OTN & SDH & Packet).TNU5U501 1-port 100G/200G programmable Hybrid Line Service Processing Board (CFP, OTN & SDH & Packet)
The U501 board has one functional version: TNU5. The U501 board has one functional version: TNU5
The SDH capacity of the U501 board is 40 Gbit/s when being installed in an M24 subrack in 1:1 mode
The IN/OUT ports of the U501 board can be set to the 100G or 200G mode as required. The U501 board supports the following service conversions:
100G mode:
80 x ODU0/40 x ODU1/10 x ODU2/10 x ODU2e/2 x ODU3/1 x ODU4/80 x ODUflex<->1 x OTU4
Packets<->1 x OTU4
8 x STM-64/32 x STM-16<->1 x OTU4
200G mode:
160 x ODU0/80 x ODU1/20 x ODU2/20 x ODU2e/4 x ODU3/2 x ODU4/160 x ODUflex<->1 x OTUC2
Packets<->1 x OTUC2
8 x STM-64/32 x STM-16<->1 x OTUC2
When configuring virtual SDH ports, observe the following requirements:
The board supports a maximum of 32 virtual SDH ports, among which four adjacent ports are classified into one group. Therefore, the eight groups of virtual SDH ports are V_SDH_1 to V_SDH_4, V_SDH_5 to V_SDH_8, ..., and V_SDH_29 to V_SDH_32
The total capacity of each port group cannot exceed 10 Gbit/s. Therefore, if an STM-16 service is configured for one port in a group, STM-64 services cannot be configured for other ports in the group
When configuring STM-64 services, you can select only the first optical port of each group, such as V_SDH_1 and V_SDH_5
TNU5U501 When configuring STM-16 services for the virtual ports, When configuring STM-16 services for the virtual ports, use the ports in the same group. Do not use the ports in another group unless no ports are left in the current group. For example, to configure an STM-16 service on three of the virtual SDH ports, use V_SDH_1, V_SDH_2, and V_SDH_3; to configure an STM-16 service on five of the virtual SDH ports, use V_SDH_1, V_SDH_2, V_SDH_3, V_SDH_4, and V_SDH_5
The U501 board is a hybrid line board and supports a mixture of OTN, SDH, and packet services. The U501 board processes and converts the received service signals into one OTU4/OTUC2 signal, which are carried over ITU-T G.694.1-compliant DWDM wavelengths. The U501 board uses coherent receiving technologies and applies to coherent systems
Datach.net can supply , if you want to know more detail and price, pls contact us.
Datach.net mainly sell new or used communications equipment. Datach.net have strong inventory and powerful suppliers. Datach.net can provide the lowest price and the best service for you. Welcome telecom construction group , communications equipment trading companies and individuals to collaborate with our company.
.