Home >>Fiber Optical Products >> Fiber Media Converter


Converter with 14 slots
 

This Ethernet media converter can interconvert electrical signals of 10Base-T and 100Base–TX twisted pairs with optical signals of 100Base-FX. It extends the network transmission distance from 100m via copper cables to 120 km via fiber optical cable.


Specification



Features:

● 10/100Mbps auto-sensed, facilitating network upgrade
● Built-in efficient switching core to implement flow control and reduce broadcast packets
● full-duplex and half-duplex auto-sensed
● Supporting automatic cross connection of twisted pair interfaces, facilitating system commissioning and installation
● Supporting Link Failure Alert (LFA)
● Supporting half /full-duplex of FX and link failure alert with optional dip-switch
● Supporting 10/100Mbps store-and-forward and 100Mbps cut-through transmission with optional dip-switch(unique)
● Supporting low-timelag transmission
● Supporting the transmission of extra-long packets up to1600 bytes
● Supporting the transmission of extra-long VLAN packets
● Supporting Quality of Service (QoS) , ensuring the transmission of VoIP packets
● Supporting STP to form a redundant network
● Extremely low power consumption (less than 2W), low heat, reliable and stable performance, and long lifetime;
● Options in single mode dual fiber, multi-mode dual f fiber, and single mode in single fiber

Typical Application:
10/100Mbps fast optical Ethernet long-distance transmitting network

TECHNICAL SPECIFICATION:
Optical Port:
Support 100Base-FX
1) Adopt standard 1*9 pin optical transceiver module;
2)Wavelength: 850nm or 1310nm in multi-mode,
1310nm or 1550nm in single-mode;
3)SC/ST/FC optical connectors are selectable.
4)Transmission distance:Up to 120km ;

Ethernet Copper Port:
Data rate: 10/100Mbps;
1)Auto-negotiate on Full/Half duplex topology;
2)Connector: UTP RJ45 connector
3)Auto MDI/MDI-X

environment condition
Operating temperature: 0C~+50 C
Storage temperature: -20 C~+70 C
Relative temperature:95% (uncondensed)

Power supply
working voltage range wide, good
anti-disturb and Isolation, work stable
option I - DC-48V,range DC-36V~DC-72C
option I - AC220,range AC160V~AC240V

Solutions

 

.

Model

Model
Specifications
HY
1 Vi
HY
1 Vi
Converter with 14 slots Datasheet.
Download
Converter with 14 slots Catalog.
Download