8 E1 to 4 Eth converter
8 E1 - 4 x 10/100 Ethernet converter with GFP-F, VC (Virtual
Concatenation), LCAS support and professional GUI NMS. It's a most
latest product in n x E1 to Ethernet converter range in Winyuan
product line. Besides the basic idea of bundling 8E1 to get 16 Mbps
via professional GUI NMS access to wide array of user friendly
features are possible now.
.
Specification
8 E1 - 4 x 10/100 Ethernet converter with GFP-F, VC (Virtual
Concatenation), LCAS support and professional GUI NMS. It's a most
latest product in n x E1 to Ethernet converter range in Winyuan product
line. Besides the basic idea of bundling 8E1 to get 8 Mbps via
professional GUI NMS access to wide array of user friendly features are
possible now. 8E1-4ETH is the IP over TDM converter, which supports the
conversion from MAC frames to 1 – 8 E1 lines. The maximum bit rate is
16Mbps (8 E1 lines). With different LAN card, E1 card and power card, it
can meet various requirements and can be customized to fit your network
needs. It not only provides alarms and status of the E1 line and
Ethernet interface together with advanced management functions, such as,
throughput statistic of the Ethernet, but also supports the Unification
Network Management via SNMP and GUI. Compliant to international
standards, the device can communicate with products from other
manufacturers adopting the same standards.
4 Fast Ethernet interfaces operate in full or half duplex with flow
control, the mode can be set or monitor by management software.
8 E1 - 4 x 10/100 Ethernet converter with GFP-F, VC (Virtual
Concatenation), LCAS support and professional GUI NMS. It's a most
latest product in n x E1 to Ethernet converter range in Winyuan product
line. Besides the basic idea of bundling 8E1 to get 8 Mbps via
professional GUI NMS access to wide array of user friendly features are
possible now. 8E1-4ETH is the IP over TDM converter, which supports the
conversion from MAC frames to 1 – 8 E1 lines. The maximum bit rate is
16Mbps (8 E1 lines). With different LAN card, E1 card and power card, it
can meet various requirements and can be customized to fit your network
needs. It not only provides alarms and status of the E1 line and
Ethernet interface together with advanced management functions, such as,
throughput statistic of the Ethernet, but also supports the Unification
Network Management via SNMP and GUI. Compliant to international
standards, the device can communicate with products from other
manufacturers adopting the same standards.
4 Fast Ethernet interfaces operate in full or half duplex with flow
control, the mode can be set or monitor by management software.
Specifications
Electrical Ethernet Interface:
Connector: RJ-45
Working mode: Auto - negotiation is the default setting
Complies with IEEE 802.3 and 10/100 Base-Tx Ethernet Protocol
E1 interface
Bit rate:2.048Mb/s±50ppm
Code format: HDB3
Impedance: 75 Ohm is default, Optional 120 Ohm
Jitter transfer, Jitter tolerance comply with ITU-T G.703、G.704、G.823
recommendations
Ethernet related parameters
MAC address table capacity: 1024
MAC aging time: 5 min
Minimum frame-length: 64 bytes
Maximum frame-length: 1916 bytes
Working mode: Support auto-negotiation compliant to IEEE802.3u. Enabled
as default
VLAN function: Disabled as default, you can set VLAN's from GUI
Flow control: Enabled as default
Bandwidth: ≈n×E1（n=0～8）Default is 8 ×E1 ≈16Mbps
Ordering options for power supply are DC 48, or AC 96 - 260 universal
with all kind of power plugs. Double power supply on request.
Operating temperature: -5℃～65℃
Storage temperature: -40℃～70℃
Humidity: ≤95％，free from condensing
Solutions
.
Model
HYC-
Download